Halloween Sampler - Projects #2 and #3

Here is the next installment of the Halloween Sampler Instructions!  This covers projects 2 and 3 (out of nine).  I've already posted the general instructions, the mat board cutting instructions, as well as project #1 and a bonus project!

First post -  Halloween Sampler
Second post - General Instructions and Mat board
Third post - Bonus Project and Project #1

And remember, if you want to download all the instructions right now in one go, then head over to Craftsy where I have them posted for $3.99.

Project #2: Frightening Ghost

Materials:
- light grey, 9 strips at 6” long (body)
- light grey, 2 strips at 4” long (body)
- light grey, 1 strip at 10” long (head)
- light grey, 2 strips at 8” long (arms)
- black, 2 strips at 2” long (eyes) – 1/16” narrow strip
- black, 1 strip at 4” long (mouth) – 1/16” narrow strip
- grey, 4 strips at 6” long (fog)

Take the nine strips of light grey 6” long and make long diamond shapes. Take the two strips of light grey at 4” long and make two teardrops. Also make teardrops out of the two 8” long light grey strips, curving the teardrops slightly at the ends. Make another teardrop from the 10” long light grey strip. Glue these together as shown to form the ghost.

For the face, create three circles from the narrow black strips, and use the larger circle for the mouth. Glue these onto the ghost.

For the ‘fog’ use 4 strips of a slightly darker color of grey. Make very long “S” coils from each of these. Glue two of the “S” shapes together as shown for the lower border, and two other “S” shapes together for the side border. Glue these together where they touch.

The ‘fog’ is of course optional. If you are choosing to put your projects into the sampler, then you may want the fog to help ‘frame’ the projects. Each of the four projects in the corners of the mat board have an element that helps to frame them.

Glue these pieces into the mat board, right column bottom square.

Project #3: Jack-O-Lantern

Materials:
Jack-o-Lantern
- orange, 1 strip at 14” (large pumpkin)
- orange, 2 strips at 16” (large pumpkin)
- orange, 2 strips at 18” (large pumpkin)
- light brown, 1 strip at 4” (large stem)
- olive green, 1 strip at 3” (leaf)
- olive green, 1 strip at 2” (corkscrew vine)
- black, 2 strips at 4” long (eyes)
- black, 1 strip at 3” long (nose)
- black, 3 strips at 2.5” long (mouth)
Border
- olive green, 2 strips 3” (leaves)
- olive green, 2 strips at 4” (leaves)
- olive green, 2 strips at 4” (vines)
- light brown, 1 strip at 2” (small stem)
- olive green, 1 strip at 1” (corkscrew vine)
- orange, 1 strip at 4” (small pumpkin)

The pumpkin is made of bright orange, five strips, one at 14", two at 16", and two at 18". Take the 14” strip and make an ‘eye’ shape. Take the other long orange strips and make crescent shapes. Glue the shorter crescents to the eye shape, and then glue the longer crescents to form the outside of the pumpkin, as shown.

The stem is light brown at 4" long, formed into an asymmetrical square shape. Make the leaf shape from the olive green 3" strip. Use a toothpick or quilling tool to help form the corkscrew vine from the 2" of olive green. The face is made of black strips, all triangles, with eyes of 4" long, nose 3", and three teeth at 2.5" each. Glue together as shown.

The vines are long “S” shapes, each 4" of olive green. Make all four leaves, and glue the smaller 3” leaves closer to the middle of the vines. Glue the longer 4” leaves to the ends of the vines.

The small pumpkin is a somewhat flattened circle made from one 4" bright orange, strip. It has a tiny square stem made from the 2" light brown strip, and a coil of 1" olive green.

As you see from the photo, the ‘vines’ and the small pumpkin are not attached, but are separately glued to the white background. The jack-o-lantern is framed nicely by the vines. Glue these pieces into the left column, into the square at the bottom left corner.